How Much Does It Cost to Hire an Electrician?

In this guide

Electrician Cost Calculator

Electrician Cost Calculator

Costs to hire an electrician vary greatly by region. Let’s calculate the cost for your zip code.

Zip code

CALCULATE

Want to receive more accurate estimates for your project?

REQUEST QUOTES

NATIONAL COSTS

Average Cost

$398

Low Cost

$85

High Cost

$8,698

See Electrician Cost Calculator Breakdown 

Average Cost Project Low-Cost Project High-Cost Project

Cost

Materials

1 15 amp 125v residential-grade duplex straight-blade receptacle

$1

1 single-gang wall plate for a duplex receptacle

$1

1 non-metallic two-gang conduit box, 35 cubic inch

$4

Labor

Setting up the job and installing the new outlet box, duplex receptacle, and wall plate

$79

Material

48" five-blade rattan fan

$294

Labor

Installing and connecting a 48" five-blade fan

$104

Materials

HVAC monitoring, thermostat, and trending module

$2,108

Intruder motion-sensing and alarm module

$952

Main interior lighting and outdoor lighting control module

$1,625

Fire and emergency service direct interconnect module

$1,000

Remote door lock actuator module

$338

100 l.f. of wire for a smart home system

$111

Labor

Installing a smart HVAC monitoring system

$277

Installing a smart intruder alarm module

$173

Installing a lighting control system

$207

Installing a fire and emergency service direct interconnect

$138

Installing a remote door lock actuator

$35

Wiring and testing the smart home system, up to 100 l.f. of wire

$1,734

Total

$85

$398

$8,698

Electrician Cost Per Hour by Level of Expertise

Electricians typically charge between $40 and $120 an hour, which is influenced by where you live and the electrician’s license grade. There are three grades - Apprentice, Journeyman, and Master. To achieve each grade, electricians must meet specific testing requirements. Apprentices are in the learning phase of being professional electrician, so they are the least experienced. Journeymen have more experience and are capable of more complicated processes. Master electricians are the most experienced and can supervise others and handle complex projects. Each grade also has a range of costs they charge:​

Apprentice Electrician

Apprentices can complete many basic electrical tasks, such as installing outlets and light fixtures. They charge an average rate of $40 to $60 an hour. To receive an Apprentice license, the electrician needs to complete hundreds of hours of classroom work, as well as 8,000 hours of supervised on-the-job experience. Apprentices will be responsible for conducting repairs and installations of electrical systems under the guidelines and supervision of a Master electrician. In most cases, this type of electrician only handles minor tasks.

Journeyman Electrician

A journeyman electrician charges $60 to $90 an hour. A Journeyman electrician has completed their apprenticeship and taken and passed the Journeyman electrician exam. They are qualified to take on more complex projects in your home, such as wiring and installing an electrical panel or car charging station. Journeymen no longer need to work under the supervision of a Master electrician. These electricians can take on many jobs but may not be appropriate for the most complex projects.

Master Electrician

Because of their experience, Master electricians charge between $90 and $120 an hour. Master electricians have completed more than 4,000 hours of work as a Journeyman. They have also taken and passed the Master electrician exam. This is the electrician you want to call for complex projects like installing a new whole-house generator or rewiring a historic property. However, they are capable of minor jobs as well. A Master electrician is the most experienced and educated of all electricians available for hire.

Electrician Service Call Cost

When you call an electrician out to your home, you may have a range of associated costs before the project even begins. For example, if you need diagnostic work done, this may have a separate hourly charge than the actual wiring and installation work. This rate is usually between $75 and $150 an hour and encompasses the travel and diagnostics and inspection of the job. The amount of education, the extent of experience, and business size also factor into the call rates.

The lowest call rates are usually associated with Apprentice electricians, while Master electricians have the highest call rates due to their experience and knowledge. Some electricians also charge a higher rate for the first hour, then revert to their normal rate for the rest of the job. This service call rate guarantees their time and work, especially if the issue turns out to be something that could have been easily corrected, such as a tripped breaker. The rate covers their gas and time to come out to the job.

This service call rate is usually waived, however, if you are getting an estimate on a planned job. This estimate is usually provided at no charge.

Large projects may also have different rates. Some companies send out more than one electrician to the job, so they may charge a higher service call and hourly rate. In this case, expect to pay at least $150 an hour for the work.

Average Cost of Electrician for Small Tasks

Electricians handle various tasks, both large and small. These are less complicated, smaller projects that any level of an electrician can handle. Projects range from something that takes less than an hour, like installing a light switch, to projects that take more time, such as installing a whole-home fan. Projects range from $70 to $1,270 depending on what is being done and which materials are chosen.

Some of the simplest projects done by electricians include installing light switches, putting in smoke and carbon monoxide alarms, adding outlets, and wiring hot tubs. For example, an outlet installation typically costs $120 to $200. Additional simple tasks for an electrician include electrical inspections, doorbell installations, light fixture work, and circuit breaker replacement.

Electricians can also install attic fans, bathroom fans, and ceiling fans. For example, installing a 48” five-blade rattan ceiling fan might cost about $400, while other ceiling fans may be more or less expensive. Electrical meter box replacement and whole house fan installation also fall under this category. This includes the fixtures for ceiling lights, track lighting, wall sconces, chandeliers, pendant lights, and more.

An electrician can do many simple tasks for you in a few hours or sometimes less than one. However, remember that the cost of the item being replaced or installed factors into the final cost. Below you will find a table with some of the most common minor projects for an electrician and their average costs. Bear in mind that those prices could be lower or higher depending on the project.

Cost to Hire an Electrician for Larger Projects

Electricians can also handle more complicated and complex tasks relating to electricity. To be considered a large project, the process typically takes days instead of hours. These jobs also require more effort and experience, so prices tend to be higher than for simple tasks. For these projects, it is advisable to hire a very experienced electrician such as a master electrician or a journeyman, who also has the experience to handle more complex projects.

A simple EV charging station installation could be as little as $1,000 or as much as $2,500 for a more complicated installation. Upgrading electrical panels also has a wide range of prices since the extent of the upgrade varies to such a high degree. As such, this product costs from $1,500 to $4,000. Home rewiring can be more complicated to determine prices since it depends on how large the home is. Costs range from $3 to $5 per sq.ft. for wiring and $6 to $10​ per sq.ft. for rewiring.

Other tasks that an electrician can take on that count as substantial projects include grounding a house, electrical rough-in tasks, and installing generators. Grounding involves creating a connection between the electrical components in the home and the ground. Rough-in, on the other hand, is a construction phase when all the electrical wiring and boxes are inserted into the walls.

The table below gives the average price ranges for some of the most common complex tasks an experienced electrician can complete.

Emergency Electrician Cost

If you have a sudden problem on a weekend, holiday, or overnight that cannot wait until the following business hours, you may need to pay a higher rate for the emergency call. Other signs of an emergency include burning odors coming from outlets or cords, hot electrical panels, or power outages. The exact rate is dependent on the grade of the electrician. But in most instances, the cost of an emergency call starts at around $150 an hour and may go higher depending on demand. For example, a call to service a generator in the middle of a power outage will likely have a higher rate than a call to inspect a circuit breaker. During high-demand times and holidays, some jobs also have an add-on fee of an additional $100 to $200.

In addition, it is not uncommon for emergency calls to have a minimum, such as the equivalent of 2 to 4 hours of work. Even if the job takes 20 minutes, you must pay the minimum fee.

Always ask what the various rates are when you call so that you are prepared. Also, assess if this is a true emergency that needs service right or if you can wait until the next business day when rates are lower.

When to Call an Electrician

If your circuit breaker keeps tripping, the fuses are blowing, or you have sparking appliances, it is time to speak with an electrician. Flickering lights, a lack of three-prong outlets, and buzzing in the walls are other signs that an electrician could help you. If you live in an older home and find the wiring is not managing the electrical load, an electrician can rewire the home and ensure it can keep up with your modern lifestyle. If you have any home issues that revolve around electricity, an electrician is needed. Electrical systems are dangerous. Only a licensed professional can handle the installation or repairs you need without the risk of danger.

How to Hire an Electrician

Electricians can be found in all locations, including large cities and small towns. Every state has specific requirements about licensing, so be aware of the rules before you hire someone. Once you find several electricians you are interested in, research whether the physical address and the one listed online are the same. You can also search with the electrician’s name to learn more about them.

When speaking with an electrician, make sure their labor cost and estimate are provided. This should include all services, so you know the price and results to expect. It is also important to be sure the electrician has insurance to protect you if your home is damaged while work is occurring.

Homeowners should also consider the payment schedule, contract, communication expectations, and dispute resolution options. Make sure the professional you choose is licensed and experienced with the work you require. Doing research and communicating with the electrician ensures you get the job done at a price reasonable for your budget.

Commercial Electrician Hourly Rate

While residential electricians charge between $40 and $100 an hour on average, commercial electricians usually charge a higher rate. This is partly due to the different demands and complexities of commercial applications, and many electricians working on commercial projects are Master grade. The average hourly rate for commercial electricians is between $100 and $120 an hour. Emergency rates and service call fees also apply.

Enhancement and Improvement Costs

Light Dimmer Cost

Adding a dimmer to your lights raises and lowers the light level, depending on your needs. It may also save on your energy bills. They cost around $10 to $85 each. Most dimmers fit into a typical wall box opening so it can replace the standard switch for a light and allow you to get a broader range of light options. This simple project can often be done in under an hour.

Energy-Efficient Fixtures and Lighting Systems

As energy costs rise, many people want to make energy-efficient upgrades to their homes. The electrical work is identical, but the fixture is what drives the savings. Switching over can cost anywhere from $175 to $500 per fixture on average.